All questions

Chemistry Lab Safety Practice Test

Browse all practice questions for the Chemistry Lab Safety Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Chemistry Lab Safety Practice Test course image
All questions

These questions are part of the practice quiz. Start practicing

  • During a procedure, when should you replace PPE such as gloves or coats if they become compromised?
  • If an emergency occurs and the TA has not asked for assistance, what should you do?
  • Weigh boats should be disposed of after weighing substances by...
  • Why should mouth pipetting be avoided in the lab?
  • Where are the first aid kits located in the facility?
  • How long should eyewash be used during the eyewash procedure when chemicals contact the eyes?
  • Which statement best reflects the distillation safety guidance for determining when it is safe to return after a hazard?
  • What is the symbol used to indicate radiation hazards?
  • What steps should you take if you notice poor airflow in a fume hood?
  • If a spill is small (<250 mL), what should you do?
  • What is the correct order to clean up a spill of unknown chemical?
  • During the Assess the Situation step of the Emergency Protocol, what should you do related to other hazards?
  • What does MSDS stand for?
  • If the fire is large, what should you do?
  • What steps should you take if a fire occurs and outside assistance is needed?
  • When should you attempt to extract a solution?
  • What is the last step listed in the Emergency Protocol?
  • When adding reagents, which practice is advised?
  • Which statement describes disposal of contaminated absorbent materials after a minor spill?
  • What is the main purpose of a fume hood?
  • What is the purpose of a chemical hygiene plan (CHP) in the lab?
  • Why should you never use water to suppress a grease or electrical fire in a lab?
  • After a potential decomposition event during distillation, what is advised before returning to the area?
  • How should you inspect glassware before use?
  • What is the first step in chemical spill response?
  • When should you use a fire extinguisher versus a fire blanket?
  • Which footwear is required in the lab?
  • Which approach is appropriate for managing a small corrosive liquid spill on a bench?
  • Which describes the correct method for disposing of waste?
  • What are the requirements for shirts worn in the lab?
  • Under what condition should the lab doors be closed?
  • What are the contact numbers for Daria, Main Office, and DPSEP?
  • What is the phone number for the Department of Public Safety and Emergency Preparedness (DPSEP)?
  • During an explosion, which action is most appropriate?
  • What is the required length and fit of pants in the lab?
  • What should you do first if someone has a medical problem?
  • How long should you flush your eyes at an eyewash station after exposure?
  • When stepping out of the lab, which action is listed as something you should remember to do?
  • If you must handle a chemical with an unknown hazard label, what should you do?
  • What does a higher NFPA number indicate?
  • Who is allowed to handle pyrophoric materials?
  • What is the NFPA symbol for a strong oxidizer?
  • What is the purpose of hazard pictograms on chemical labels?
  • What does NFPA stand for?
  • What is the preferred method to transfer solvents to minimize splashes and fumes when volatile?
  • Where are safety showers located and who should use them in an emergency?
  • What does a GHS hazard pictogram indicate?
  • Make-up labs are allowed under which circumstances?
  • Which individuals should you contact for safety emergencies?
  • What is the purpose of hazard statements and precautionary statements on container labels?
  • Which of the following is a recommended step before turning on a hot plate or stirring a hot solution?
  • In case of burning clothing, what is the first action you should take?
  • Who is allowed to operate the fire blanket or fire extinguisher?
  • Before using PPE, how should you inspect it for safety?
  • Which action is not recommended when clothing is on fire?
  • Which two locations are listed for accessing the Merck Index or Condensed Chemical Dictionary?
  • What does a 'Reactivity' hazard on the NFPA diamond indicate?
  • Which practice helps prevent contamination when handling reagents?
  • Are unauthorized experiments permitted?
  • What is acetone used for?
  • How should incompatible chemicals be stored to prevent dangerous reactions?
  • Which PPE item is specifically used to protect the hands from corrosive acids?
  • What is the guideline for replacing lab coats and gloves during a procedure?
  • Which device is used to transfer liquids safely in the lab instead of mouth pipetting?
  • Which color represents health hazard on the NFPA diamond?
  • How often should eyewash stations be inspected and flushed?
  • What is the proper method for cleaning up broken glass?
  • Which class of fire extinguisher is typically used for solvent fires in the chemistry lab?
  • Which color denotes special hazards on the NFPA diamond?
  • Are fashion scarves allowed in the lab?
  • Which action is part of the earthquake safety procedure?
  • Why are lab doors kept open during a lab?
  • What kind of information do the Merck Index and the Condensed Chemical Dictionary provide?
  • What is the phone number for the Chemistry Main Office in Monsanto Hall RM 125?
  • How should sharps be disposed of in a chemistry lab?
  • Where should emergency showers be located relative to hazard areas?
  • What fire safety equipment is present in each laboratory room?
  • What is the proper action for lids on bottles or containers after use?
  • When should students enter the lab?
  • If there are no special hazards, what is done with the white diamond on the NFPA label?
  • Why is sitting on the floor in the chemistry building discouraged?
  • For a spill involving hazardous substances, what is the recommended action?
  • Which PPE should be worn when operating microwave reactors or electrochemical apparatus?
  • Where is the balance room?
  • Which color is reserved for special hazards in the NFPA diamond?
  • What is the PASS technique for using a fire extinguisher?
  • Which area is explicitly restricted for students in the chemistry building?
  • Why is it important to change gloves after contact with hazardous substances?
  • What should you do with bottle lids after using a reagent bottle?
  • Weigh boats are used when weighing substances. After weighing, what should you do with them?
  • What PPE should be used when breaking glass and handling hot glassware?
  • If you break glass, what should you do?
  • What symbol indicates an unusual reaction with water in the NFPA system?
  • What information does a chemical's MSDS sheet typically include?
  • How should you position your body and materials when working in a fume hood?
  • During a lab, should the doors remain open or closed?
  • Which PPE item protects the feet in a laboratory setting?
  • Which PPE item is used to protect the eyes when handling corrosive acids?
  • What is the third step in the Emergency Protocol?
  • Which NFPA hazard categories are described in the material?
  • If airflow is poor, which action is recommended?
  • What safety steps should you take when using a microwave reactor or electrochemical apparatus?
  • What is the correct sequence of actions for a large chemical spill on a person?
  • What is a vent hood?
  • Which date-related information must be included on a chemical label?
  • Is gum allowed in the lab?
  • Which number is associated with the Department of Public Safety and Emergency Preparedness in the emergency protocol contact list?
  • What does a 'Fire' hazard on the NFPA diamond indicate?
  • What is the range form of the NFPA hazard rating scale?
  • What is DI water and why is it used in experiments?
  • Which practice helps maintain fume hood performance?
  • What is the correct placement of cords to prevent tripping hazards in the lab?
  • If you run out of DI water, what is the proper action?
  • For a spill larger than 250 mL, who should you contact?
  • During a tornado, what is the recommended action?
  • What is the correct practice regarding damaged glassware?
  • In the chemistry lab, what should you do with long hair and jewelry?
  • What does a vent hood primarily protect you from?
  • What color are the acetone bottles?
  • Which practice helps reduce exposure to vapors when using a vent hood?
  • Should you wash your hands after handling chemicals even if they are not labeled dangerous?
  • Which color does not have a numeric value on the NFPA scale?
  • What is the first step listed in the Emergency Protocol?
  • After a chemical exposure incident, which action should you take?
  • What are the basic steps required by hazard communication before starting work with a new chemical in the lab?
  • Why is food not allowed in the laboratory?
  • Where is the reading room RM 115 located within the Department of Chemistry?
  • Which practice is recommended for storing oxidizers relative to organics?
  • Choose the correct cleanup sequence for an unknown chemical spill.
  • What information should you provide when reporting a spill to your supervisor?
  • What is the recommended practice when moving cylinders of compressed gas?
  • What is the first step you should take after chemical exposure to the face?
  • Where do you obtain solid chemicals?
  • Where is your lab located?
  • Which statement best describes what must be included on a chemical label for hazard information?
  • If the proper reaction doesn't occur after adding more reagents, what should you do?
  • What is the recommended order of putting on PPE?
  • When should a fume hood be used?
  • Which colors are rated on the NFPA hazard scale of 1-4?
  • How should glassware be cleaned after each experiment?
  • Why should you avoid applying excessive force when assembling glass joints?
  • Acetone should not be used on safety goggles because...
  • What is the Safety Data Sheet (SDS) and what key information does it contain?
  • Should you add solid material to a liquid when it is near its boiling point?
  • Where can you find the Merck Index or Condensed Chemical Dictionary?
  • How far should an eyewash station be from a chemical hazard, and what is the expected response time to reach it?
  • What is a key feature of appropriate goggles?
  • Which color represents flammability on the NFPA diamond?
  • In an active shooter situation, which action is recommended?
  • After transferring a solid from filter paper, what should you do with the filter paper?
  • Why should you never apply excessive force when assembling glass joints or fume hoods?
  • How should you dispose of contaminated absorbent materials after a minor spill?
  • What is the guidance for acrylic nails in the lab?
  • Where should you keep a fire extinguisher in the lab and how often should it be inspected?
  • What are common issues that reduce hood effectiveness and how can you mitigate them?
  • What should you do if you must leave the room while a heating or reacting process is ongoing?
  • During the initial eyewash rinse, should goggles remain on or be removed?
  • When reporting a spill to your supervisor, which details should you provide?
  • What steps should you take when a chemical exposure incident occurs (skin contact, inhalation, ingestion)?
  • How should you dilute concentrated solutions?
  • What is the second step in the Emergency Protocol?
  • Which sequence correctly describes the steps to take if chemicals contact your face?
  • If chemical splashes to the eyes occur, what is the correct immediate action?
  • Why should you avoid using adapters or damaged cords with electrical equipment?
  • What is the role of ventilation when handling volatile substances?
  • What does the acronym DI stand for in DI water?
  • Which color represents reactivity on the NFPA diamond?
  • If you are late for lab or miss lab, what is the consequence?
  • What should you do after using an eyewash or emergency shower?
  • Where can you typically locate the MSDS for a chemical?
  • Which PPE item protects skin and clothing from chemical splashes?
  • Which practice supports safe operation in a fume hood?
  • How should you contact your TA or instructor?
  • How should you respond if a piece of electrical equipment emits smoke or shows signs of overheating?
  • Expand the acronym DPSEP.
  • How should you control a small spill of a corrosive liquid on a bench?
  • What does it mean if a chemical has a 'Health' hazard on its NFPA diamond?
  • What is the purpose of secondary containment for chemical storage?
  • In which building is the Chemistry Main Office located?
  • During an earthquake, what should you do if you are outside?
  • What information must a chemical label include in a lab?
  • Does the University insure students?
  • Where should you place your bookbags and coats after entering the lab?
  • If a chemical is rated high in health, flammability, and reactivity, which colors would show high numbers?
  • What type of information would you expect to find on an MSDS to help assess a chemical's hazards?
  • If there is a sudden rise in temperature of a liquid being distilled, what should you do?
  • How should you handle concentrated sulfuric acid and why?
  • What is the symbol used for materials that may polymerize under some emergency conditions?
  • How should long hair be managed in the lab?
  • Which steps should you take if you notice a label on a container is damaged or unreadable?
  • Which of the following best describes the initial action you should take when a chemical spill occurs?
  • Use of dichromate, piranha solution, sulfuric acid, or other strong acids or strong oxidizer cleaning solutions should be used:
  • If a small lab fire occurs, which action is recommended?
  • How should flammable liquids be stored and what container requirements apply?
  • Why should acids be stored away from bases?
Subscribe

Get the latest from Examzify

You can unsubscribe at any time. Read our privacy policy